Peripheral Shield
- Custom peripheral shield supporting an assorted array of peripherals.
- Plug-in and Play with IMU, OLED and Joystick.
- Build your own smart watch and what not!
We present to you with our very own one-of-a-kind Custom Development Board, designed and tested by Electronics Club! The board is developed around the ESP32 S3 SoC and comes with WiFi and Bluetooth functionalities. It has both USB and UART ports, which does not just allow you to upload your code, but also allows you to connect to your pheripherals easily. It is fairly compact and it has the CFI and Electronics Club logos, giving it a classy look!
240 MHz
Dual core
45 GPIO pins
Max voltage upto 12V
SPI, I2C, I2S, UART
16 MB-Flash memory and PSRAM-2MB
WiFi, Bluetooth, ESP Now
USB and UART ports are available
Vidyut | Dev Board 2.0 | Dev Board 1.0 | Arduino UNO | |
---|---|---|---|---|
Built around | ESP32-S3-16NR2 SoC | ESP32 WROOM SoC | ESP32 WROOM SoC | ATmega 328p |
Clock Frequency | 240 MHz | 240 MHz | 240 MHz | 16 MHz |
Cores | 2 | 2 | 2 | 1 |
Operating Voltage | 3.3V | 3.3V | 3.3V | 5V |
Digital I/O Pins | 45 | 24 | 24 | 14 |
Analog Input Pins | 20 | 15 | 15 | 6 |
SPI/I2C/I2S/UART | 4/2/2/2 | 4/2/2/2 | 4/2/2/2 | 1/1/1/1 |
Flash Memory | 16 MB | 16 MB | 4 MB | 32 KB |
SRAM | 520 KB | 520 KB | 520 KB | 2 KB |
PSRAM | 2 MB | 0 | 0 | 0 |
USB OTG | Yes | No | No | No |
WIFI | Yes | Yes | Yes | No |
Bluetooth | Yes (Bluetooth 5) | Yes | Yes | No |
Capacitive Touch pins | Yes | Yes | Yes | No |
Input Supply Voltage | 3.3 - 12 V | 3.3 - 6 V | 3.3 - 6 V | 5 V |
6-DOF IMU sensor | No | No | Yes | No |
Vidyut | |
---|---|
Built around | ESP32-S3-16NR2 SoC |
Clock Frequency | 240 MHz |
Cores | 2 |
Operating Voltage | 3.3V |
Digital I/O Pins | 45 |
Analog Input Pins | 20 |
SPI/I2C/I2S/UART | 4/2/2/2 |
Flash Memory | 16 MB |
SRAM | 520 KB |
PSRAM | 2 MB |
USB OTG | Yes |
WIFI | Yes |
Bluetooth | Yes (Bluetooth 5) |
Capacitive Touch pins | Yes |
Input Supply Voltage | 3.3 - 12 V |
6-DOF IMU sensor | No |